Duração:
5 dias
Próxima Data:
Consulte-nos
Local:
Descrição
The Cisco Aggregation Services Router 9000 Series Essentials (ASR9KE) v6.0 course introduces you to the features and functions of the Cisco® Aggregation Services Router (ASR) 9000 Series platforms. Through a combination of lecture and hands-on labs, you will gain an understanding of all major aspects of the platform, including hardware, Layer 2 and Layer 3 services, routing protocols including Segment Routing, Layer 2 and Layer 3 multicast, Quality of Service (QoS) features, and network virtualization. The course investigates Cisco Internetworking Operating System (IOS) XR 64-Bit Linux-based feature parity in the environment, as well as how to install Cisco IOS® XR 64-Bit software packages.
This course will help you:
- Understand the essential features and functions of the ASR 9000 Series routers running Cisco IOS XR 64-Bit software
- Practice Cisco IOS XR 64-Bit configurations on the ASR 9900 Series router in lab exercises
- Configure Cisco ASR 9900 configuration changes and restore older versions of the configuration
- Install the Cisco IOS XR 64-Bit Software operating system, Package Information Envelopes (PIEs), and Software Maintenance Updates (SMUs)
- Understand data flow through the Cisco ASR 9000 and ASR 9900 Series router
Destinatários
This course is designed for technical professionals who need to know how to deploy Cisco ASR 9000 Series routers in their network environment. The primary audience for this course includes:
- System engineers
- Technical support personnel
- Channel partners, resellers
-
Área: Cisco
Programa:
Module 1: Cisco ASR 9000 Series Hardware
- Examining the Cisco ASR 9000 Series Chassis
- Examining the Cisco ASR 9000 Series Architecture
- Examining the Route Switch Processor/ Route Processor (RSP/RP) Functions and Fabric Architecture
- Examining the Cisco ASR 9000 Series Line Card
- Examining the Cisco ASR 9000 Power Subsystems
Module 2: Cisco IOS XR 64-Bit Software Architecture and Linux Fundamentals
- Cisco IOS XR 64-Bit Software Fundamentals
- Cisco ASR 9000 IOS XR 64-Bit vs. 32-Bit
- Exploring Linux Fundamentals
Module 3: Cisco IOS XR 64-Bit Software Installation
- Examining Resource Allocations and Media Mappings
- Migrating to Cisco IOS XR 64-Bit Software
- Performing Disaster Recovery
- Installing Software Packages
Module 4: Cisco IOS XR 64-Bit Software Configuration Basics
- Configuring Cisco IOS XR 64-Bit Basic Operations
- Cisco IOS XR 64-Bit Initial Configuration
- Reviewing the Configuration
Module 5: Cisco IOS XR 64-Bit Software Routing Protocols
- Exploring Intermediate System to Intermediate System (IS-IS)
- Exploring OSPF
- Exploring BGP
- Exploring Routing Protocol for LLN
Module 6: Multicast Routing
- Exploring Multicast Routing
- Exploring Protocol Independent Multicast (PIM)
Module 7: Cisco Multiprotocol Label Switching
- Examining the MPLS Forwarding Infrastructure
- Implementing the MPLS Label Distribution Protocol (LDP)
Module 8: Cisco IOS XR 64-Bit Segment Routing
- Segment Routing Concepts
- Interior Gateway Protocol Segment Routing (IGP SR) Control Plane Overview
- Prefix and Adjacency Segment IDs (SIDs)
- SR IS-IS Multi-Level and OSPF Multi-Area
- IS-IS SR Configuration and Verification
- OSPF SR Configuration and Verification
Module 9: Layer 3 VPNs
- Examining L3VPNs
- Exploring L3VPN Control and Data Flow
- Configuring L3VPNs
- Verifying the L3VPN Operation
Module 10: Cisco ASR 9000 Layer 2 Architecture
- Examining Carrier Ethernet and Flexible Ethernet Edge
- Comparing Layer 2 and Layer 3 VPNs
- Examining the ASR 9000 Layer 2 Infrastructure and Ethernet Flow Points (EFPs)
- Layers 2 and 3 Coexistence and VLAN Tag Manipulation
- Exploring the Layer 2 Network Infrastructure
Module 11: Point-to-Point Layer 2 Services
- Point-to-Point AC-AC and Attachment Circuit Redundancy
- Point-to-Point AC-Pseudowire (PW) Cross-Connect
- Examining Pseudowire Redundancy and Resiliency
Module 12: Layer 2 Multicast
- Examining the Cisco ASR 9000 Series Multicast
- Implementing Multicast
Module 13: Quality of Service
- QoS Basics and the Modular QoS CLI (MQC) Mode
- Layer 2 QoS Example
Pré-requisitos:
Before attending this course, you should have the following knowledge and skills:
- Basic IOS XR 64-Bit Software configuration commands
- Basic knowledge of router installation and some experience with installation tools
- Routing protocol configuration experience with BGP, Intermediate System-to Intermediate System (IS-IS), and Open Shortest Path First (OSPF)
- Knowledge of Layer 2 IEEE switching and related protocols
- Strong knowledge of MPLS configuration or multicast configuration experience
- Experience troubleshooting Cisco routers in a large network environment
Partilha: